8.3 cummins

2/16/27/28/29  installed piston packs into engine hooked push rods up to crank installed main bearings  torqued  top spec. also installed crank timing gear heated to 300 degrees  and installed then timed it  to the cam also installed oil pump. 2/28 installed timing gear cover  we had to pull the cam and oil pump and installed  back of timing gear cover reinstalled the cam and oil pump installed rear crank seal and rear main oil seal. also worked on toyota forklift . 2/29 taped out  oil pan drain plug and put a plug in it  also installed oil pan went to asbtc and presented Denmark cd. then went and worked on toyota forklift . i have  a total of 38 hours and a month total    of a 151hors and 30 minutes.